Skip to main content
  1. Home >
  2. Products >
  3. IT Products and Systems >
  4. Servers >
  5. Fujitsu Unix Servers >
  6. Downloads >
  7. Drivers >
  8. FUJITSU 10Gigabit Ethernet

FUJITSU 10Gigabit Ethernet 1.0

Overview

" FUJITSU 10Gigabit Ethernet 1.0 " is a 10 Gigabit Ethernet Card (10GBase-SR) driver when using with Solaris™ 10 Operating System.
Please refer to Notes below.

Updated

  • Install Server Build Guide I/O device driver (SPARC Enterprise) Rev.14 (April 3, 2012)
  • Install Server Build Guide I/O device driver (SPARC Enterprise) Rev.13 (February 2, 2012)
  • Install Server Build Guide I/O device driver (SPARC Enterprise) Rev.12 (July 7, 2011)
  • Install Server Build Guide I/O device driver (SPARC Enterprise) Rev.10 (June 11, 2010)
  • Version 1.0 (May 26, 2009)

Operating Environment

Be sure to confirm the installed operating environment before using this driver.

Server Model SPARC Enterprise
System Requirements Solaris 10(5/08 or later release)
Hardware 10 Gigabit Ethernet Card (10GBase-SR)
  • SE0X7HE1X



Product manual

The following driver manuals provide installation.

Notes

  1. Installation
    • To install the driver, use the installer (install ) which is included in the driver package. Do not use the pkgadd (1M) command.
  2. Patches
    • The patch for this driver is 915064-XX.

  3. Priority Order of Instance Number of 10 Gigabit Ethernet card (10GBase-SR)
    • Instance number allocated to a device node on a new additional GigabitEthernet card may be unpredictable.
      Please refer to notes described in "The order of instance numbers of optional cards" in "SPARC Enterprise Servers Hardware Platform Guide" to install the 10 Gigabit Ethernet card (10GBase-SR).

      For the "SPARC Enterprise Servers Hardware Platform Guide", please visit   Solaris OS Installation  page.

Download

Before downloading and installing the driver ensure you have read and understood the notes and had necessary information on operating environment.

Others